Stock Preparation

UV 100 Pressure Screen Black Clawson 4-foil rotor 316 SS construction.

Black Clawson P24 Pressure Screen Stainless Steel Body Stainless Steel 4-Foil Rotor Slots .020" Stainless Steel Basket Belt Drive With Base

(2) Black Clawson Model No. P12 Screen Housing Stainless Steel; Unused Since Rebuild by MTR MARTCO to Original OEM Specs Order# 888775; L-45 W-45 H-56; 860 Lbs

Andritz Moduscreen F50 Rotor Type: LR Basket Type: Slotted Hole Measure: Width: 0.009 Height: 38" Mod #: F-50 VHS Int: 43.500 Ext: 50.250" Height: 40" Inlet: 12" Outlet: 12"Reject: 1 X 8" and 1 X 6" Motor - General Eletric AC HP: 350 RPM: 1190 Frame: Volts: 2400 Enclosure: Tefc Mounting Position: Vertical Application: Belt Made In Finland Maunfactured In 2006

Ultrasorter Size 30 Tailings Screen by Black Clawson . New 2000. 316L Stainless Steel Construction. Belt driven 50 HP 1200 RPM motor. 2 ½% Maximum feed consistency. Approximately 30 BDTPD but capacity will vary according to the specific application. 6" (152mm) Inlet plate flange and 8" (203mm) accepts plate flange. Equipped with a screenplate with conically drilled holes. Can be used in a paper machine approach system secondary fiber screening or in a pulp mill screening system.

Falk Model No. 2100Y1-LD; Gear Drive 6 .786/1 Ratio; 1200 Input RPM 176.8 Output RPM 153; Service Rating HP 2.2; Service Factor 6.8 US Gallons; w/ Base; L-100 W-70 H-50

Falk Enclosed Gear Drive Model No. 1135YF1; Ratio 4.708/1; 700 HP Service Rating; 1200 RPM Input; 254.9 RPM Output Unused Storeroom Spare

45-1B Sprout Waldron Disk Refiner Completely Rebuilt Immediately Available. Operates at 2500 HP and 4000 Volt.

Beloit M48 Horizontal Pressure Screen Stainless Steel Casing Stainless Steel Rotor Belt Driven

Andritz Model TF 34 Double Disc Refiner 34" Rotor Stainless steel Casing Less Door

Black Clawson Hydrapurge II Size 2

20' Diameter Black Clawson Pulper - Black Clawson; Capacity: 425 TPD at 3%; Hymac Turboflex Retrofit; Low Consistency Type: Continuous; Construction Material: Stainless Steel Interior and Exterior; One (1) Pulper Bottom Accept Chamber; One (1) Pulper Tub In Three (3) Sides Upright; One (1) Vokes Rotor 87-87.5" 8-Vanes S/S; One (1) Plug Made Of Carbon Steel; Four (4) Pulper Legs; One (1) Wear Plate; One (1) Extraction Plate. Spares Parts Available Separately: Vokes Rotor (2) Extraction Plates 3/8' and 1/2" Holes Gearbox Rotor Hub and Wear Plate.

GL&V 350v Pulper Drives With Stainless Steel Extraction Plate With Stainless Steel 6-Vane Rotor 44" Diameter Rotor Casting # D54 307003 48" Diameter Extraction Plate 1" Diameter Holes With Extraction Chamber

Voith Model No. GV 15 Pulper Gear Drive Ratio 5.86/1

Voith pulper drive. Ratio 3.88; Bull gear 97 teeth; Pinion gear 25 teeth; model GV15.

Reject Sorter RS-2B Rotor Shafts Made of Mechanical Tubes Mtl: 4140 Blades and Flight Made in S/S 304.

Andritz Moduscreen Model F50 Rotor Type: LR Basket Type: Slotted Size: Width: 0.007" Height: 38" Serial#: 1912 Interior Diameter: 43.500" Ext: 50.250" Height: 40.500" Inlet: 12" Outlet: 12" Reject: 1 X 8" and 1 X 6" Motor - General Electric AC HP: 350 RPM: 1190 Frame: 5011I6 Volts: 2400 Enclosure: TEFC Mounting Position Vertical Application: Belt Drive Made In Finland Manufactured 2001.

Metso Optifiner Conica refiner; Size DF-1; Mfg 2006; Model No. Optifiner DF-1; L-60 W-36 H-45; 2774 Lbs

17.5" Diameter Black Clawson High Density Cleaners

Bird CN70 Headbox Pressure Screen 225 RPM. Comes with 200 HP Motor Rotation CCW 60 PSI. Basket with .018" Slots included.