Close
Search
Picture for category Pulpers

Pulpers

Paper Mill Equipment, Used Pulpers and other Surplus Paper Machinery.

20' Diameter Black Clawson Pulper - Black Clawson; Capacity: 425 TPD at 3%;

126812
20' Diameter Black Clawson Pulper - Black Clawson; Capacity: 425 TPD at 3%; Hymac Turboflex Retrofit; Low Consistency Type: Continuous; Construction Material: Stainless Steel Interior and Exterior; One (1) Pulper Bottom Accept Chamber; One (1) Pulper Tub In Three (3) Sides Upright; One (1) Vokes Rotor 87-87.5" 8-Vanes S/S; One (1) Plug Made Of Carbon Steel; Four (4) Pulper Legs; One (1) Wear Plate; One (1) Extraction Plate. Spares Parts Available Separately: Vokes Rotor (2) Extraction Plates 3/8' and 1/2" Holes Gearbox Rotor Hub and Wear Plate.

14' Diameter Helico Pulper; Fiberprep Size: 15 Cu.Meters Height: 12 Ft. Ser

126813
14' Diameter Helico Pulper; Fiberprep Size: 15 Cu.Meters Height: 12 Ft. Serial #: HP-135 Model: 15 M CU; Construction: Stainless Steel Tub Split In 2 Pieces for Transport; Made in USA; Weight: 15000 Lbs; Overall Dimensions: 14' x 12' Height; Condition: Used; Includes: One (1) Helico Rotor Ð Fiberprep 15 CU M - 1600mm - S/S; One (1) Gearbox - Falk - Ratio: 6.216; Rated HP: 400; S.F.: 2.51; Input Rpm: 1160 Rpm; Model: 427ZBX2-S.

12' Diameter Pulper Hydrapulper Kadant Black Clawson Iron Tub Size 12'; S/N

126814
12' Diameter Pulper Hydrapulper Kadant Black Clawson Iron Tub Size 12'; S/N: P70-2984; Dimensions: 12' Dia x 7' Height; Pulp Volume: 19.8 M_; Retention Time: 7 to 9 Min; Operation Consistency: 3.5 to 4.5 %; Capacity: OCC 165 TPD; Includes: Two (2) 300 HP Kadent BC Size 300 Pulper Drives; Two (2) 42" Kadent BC 8-Vane Impellers CCW Rotation.

12' Pulper; Mfg: Hydraulic Machinery; 144" Diameter X 96" Deep; Constructio

126815
12' Pulper; Mfg: Hydraulic Machinery; 144" Diameter X 96" Deep; Construction: Stainless Steel Interior and Exterior; Gear Reducer Ratio: 4.0; Pulper is Disassembled in Three (3) Sections.

16' Diameter Pulper Kvaerner Hymac Model: 16-3B-56; Capacity: 400 ADTPD; Ty

126816
16' Diameter Pulper Kvaerner Hymac Model: 16-3B-56; Capacity: 400 ADTPD; Type: Batch Continuous at 6% Consistency. Dimensions: 16' Dia x 12' High; Extraction Plate (316 SS): 22.7% Open Area 5/8" Hole; 5-15 Minute Batch Time; Complete Drive Size 3B Bearing Housing with Hub Adaptor ; 75" Diameter Sheave 8V 10 Gr; 56" Rotor; Six (6) Baffles; Four (4) Legs. Motor Vertical Mount 400 HP 885 RPM 2300 Volts; Safety Guards Excluded Dismantled and Available for Immediate Shipment. Spare Available Separately: Turboflex Pulper Impeller; Pulper Shaft - Kvaerner Hymac Turboflex 3B Drive.

675 ADSTD Andritz Fibreflow 350 Drum Pulper 3.5 Meter Diameter Drum. Pulper

126198
675 ADSTD Andritz Fibreflow 350 Drum Pulper 3.5 Meter Diameter Drum. Pulper drum construction is 316 SS 81' Length x 11.5' Diameter. Complete pulper includes drive and lubrication system. It has a counter clockwise rotation looking at the discharge end. Installed new in 2001 it was only in use for about 4-5 Years. Previously was pulping ONP / OMG / Pre-consumer Waste. Capacity up to 675 ADTPD Input / 500 BDSTD Output depending on wastepaper grades. Equipment has been dismantled and professionally packaged. It is immediately available for shipment.