http://www.convertingplant.com
  • English
  • Spanish
  • Chinese

Equipment Listings - Paper Mill Equipment, Other

  • Fan Pump
    • IEN# 126708 - Ahlstrom Model No. ZVT-35 Split Case Fan Pump; 4600 GPM, 140 FT Head; 6-Vane stainless Steel Impeller; 19,75: Impeller Diameter, Split/Staggered, Stainless Steel; L-72, W-60, H-48; 2,996 Lbs
      For Information...
    • IEN# 126715 - Ahlstrom Model No. ZX60U Pump Rotating Assembly; 6-Vane; 25" Impeller Diameter, Split/Staggered Red Skewed Stainless Steel; L-81, W-30, H-30; 1,092 Lbs
      For Information...
    • IEN# 126693 - Sulzer ZP32-400 Split Case Pump, Stainless Steel Casings; 7-Vane 18.25" Diameter Stainless Steel Impeller, Split, Staggered, Skewed, 70 FT/H, 7850; L-65, W-72, H-70; 3,450 Lbs
      For Information...
    • IEN# 126262 - Goulds 3405 M, Size: 8x10-12, Impeller: 10.5" Diameter, 316 Stainless Steel
      For Information...
    • IEN# 126736 - Goulds 3420 Pump Rotating Assembly, 30x36x42, With 37.5" 6-Vane Split, Staggered Impeller, 108" Shaft Length, Bearing Pattern # 63212, Impeller Casting # 0053 03051 A02, Unused Storeroom Spare
      For Information...
    • IEN# 126037 - Ahlstrom ZUU 50 Split Case Fan Pump. Capacity at 1200 RPM: 13,000 GPM at 135 Ft.Hd. Pump has CI Housing in good condition. Discharge Flange: 20” Diameter; Suction Flange: 24” Diameter.
      For Information...
    • IEN# 126694 - Ahlstrom ZUU-50; Double Suction Pump, 20x24 Duplex Stainless Steel Casing; 165 Ft of Head, 1190 RPM; 12000 US Gallons/Min 22"; L-82, W-65, H-80
      For Information...
    • IEN# 126695 - Warren Model No. 30DLB31 Rotating Assembly; 7-Vane Stainless Steel Impeller, Split, Staggered, Skewed, Storeroom Spare; L-92, W-36, H-40; 2,332 Lbs
      For Information...
    • IEN# 126034 - Sulzer ZPP Fan Pump. Size 52-600 Split Case Pump, Stainless Steel Casing and Rotating Assembly. Year 1999. Flow Characteristics: 22,450 GPM; 134 FtHd; RPM 800. Low Pulsation Ahlstrom Pump.
      For Information...
    • IEN# 124280 - Ahlstrom ZY 100 Rotating Assembly, Horizontal Axial Split Case Pump Impeller. Material: 316SS.
      For Information...
    • IEN# 126260 - Babcock & Wilcox, - 24x24-DG 24x24-26, Impeller: Staggered S/S 27.400" 6-vane on Each Side, Body: Stainless Steel, Seal: Packing, Weight: 8000 Lb, Dimension: 72"w, 72"d, 72"h, Capacity: Head: 80 Ft, Flow: 23 000 Us Gpm, Speed: 675 Rpm, Motor: 600...
      For Information...
    • IEN# 124288 - Ahlstrom ZZZ 80 Rotating Assembly, Horizontal Axial Split Case Pump Impeller. Material: 316SS.
      For Information...
    • IEN# 126035 - Ahlstrom Z-X60U-2 Split Case Double Suction Fan Pump. 15,000 GPM (76 L/sec); 90 Ft. Head (27.4 M); Rated at 890 RPM. Construction 316 SS Casing and Impeller Assembly.
      For Information...
    • IEN# 124281 - Ahlstrom Model ZUU 50 Axial Split Case Pump; Discharge Flange: 20” Diameter; Suction Flange: 24” Diameter; Total Dynamic Head: 110 ft (33.5m); Flow: 15,530 GPM (980 l/sec); RPM: 960. Material: 316SS Case and Rotating Assembly.
      For Information...
    • IEN# 126256 - Ahlstrom/Sulzer - ZX 80 Y-2, 36x32-32, Impeller: Staggered, S/S, 31.900", 8-Vane on Each Side, Body: S/S, Weight: 11300 Lbs, Dimension: 84"w, 96"d, 108"h, Capacity: Head: 80 Ft ,Flow: 31 700 US gpm, Speed: 580 RPM, Inlet: 36" Outlet: 32"
      For Information...
    • IEN# 126264 - Goulds 3405 L, 6x8-22 Impeller: 18" 5-vane, Body: D. Iron, Seal Type: Mechanical, Fan Pump
      For Information...
    • IEN# 126259 - Babcock-Wilcox, - 12/14 DG ,Impeller: S/S 13.5", Body: S/S, Seal Type: Gland
      For Information...
    • IEN# 126033 - Sulzer ZPP Size 51-600 Split Case Pump, Constructed of 316SS Casing and Rotating Assembly. Size 24" x 28"; Materials 316 SS Casing and Rotating Element. Flow Characteristics: 19,050 GPM; 64 FtHd; 700 RPM. Year 2000.
      For Information...
    • IEN# 120158 - Voith Model 635 DK 70/90, Year 1989. Quantity (2) Available. Flow: 35000 GPM at 80 feet head. 1000 HP / 880 RPM. Discharge Diameter: 70cm (27.56"). Suction Diameter: 90cm (35.43")
      For Information...
    • IEN# 126266 - Worthington, 4 LR-10 4X5-10 Impelller Dia.: 8.750", Bronze Body: ,Made in USA Rebuilt Condition With New Parts,pump, Horizontal Split Case,
      For Information...
    • IEN# 126258 - Allis-Chalmers 16x14 HS D.Iron, Fan Pump Casing, 16x14 HS
      For Information...
    • IEN# 126254 - Ahlstrom/Sulzer Model Z-X60U-2, Size 24x24-26, Impeller: Staggered, 316 SS, 590 MM (23.250"), 7-vane on Each Side, Body: 316 Stainless Steel, Seal: Packing, Weight: 5600 Lb, Dimension: 80"w, 65"d, 70"h, Capacity: Head: 33.9 M (112' Tdh), Flow: 833.3
      For Information...
    • IEN# 126717 - Goulds 3420 Pump Rotating Assembly; 20x20x30; 25" Diameter, Stainless Steel 5-Vane Split/Staggered, Skewed Impeller Stainless Steel Shaft; RH; L-93, W-40, H-32; 1618 Lbs.
      For Information...
    • IEN# 126263 - Goulds Model 3405, Size: 12x14-14, Casting #: 54577, Goulds Parts#: 254-11 1203, 316 Stainless Steel, No Shaft and No Impeller Casing
      For Information...
    • IEN# 126737 - Ahlstrom Z-X60U Pump Rotating Assembly, 7-Vane Stainless Steel Impeller, Split/Staggered, 25" Impeller Diameter, Stainless Steel, Storeroom Spare
      For Information...
    • IEN# 126768 - Sulzer Model ZPP31-400 Split Case Pump, Rated at: 10,250 GPM (646.7 L/s), and 100 Ft. Head (30.48 M), at 1200 RPM. Material: A890. Impeller Diameter: 17.5"
      For Information...
    • IEN# 126738 - Goulds 3420 Pump Rotating Assembly, 30x30x38, 33.5" Diameter Stainless Steel Impeller, 6-Vane Split Staggered And Skewed, Stainless Steel Shaft, Bearing Assembly, Storeroom Spare
      For Information...
    • IEN# 123864 - Warren Model 24 DLB 32 Split Case Double Suction Pump. 316 SS Construction. GPM: 21,000; Feet Head: 66. Listed In Good Condition.
      For Information...
    • IEN# 126741 - Ahlstrom ZXX-70 Split Case Pump, 28x30x32, Stainless Steel Casing, 26.5" Diameter Stainless Steel Impeller, 7-Vane, Split, Staggered, Skewed, Complete Rotating Assembly, Stainless Steel Shaft, Couplings, Packing, 34860 Gpm, 80 Ft Head
      For Information...
    • IEN# 124182 - Warren Model 20DLB22H Rotating Assembly, 316 SS, for Double Suction Pump includes Rings. QTY (1).
      For Information...
    • IEN# 126255 - Ahlstrom - ZX 60 U-2, 24x24-26, Impeller: Staggered, S/S, 640 MM - (25.175"), 7-Vane on Each Side Body: Stainless Steel, Seal: Packing, Weight: 5600 Lb,. Dimension: 80"w, 65"d, 70"h, Capacity: Head: 90 ft, Flow: 19 000 US gpm, Speed: 780 RPM, Year:...
      For Information...
    • IEN# 126742 - Ahlstrom ZXX-70 Split Case Pump, 28x30x32, Stainless Steel Casing, 30.5" Diameter Stainless Steel Impeller, 7-Vane, Split, Staggered, Skewed, Complete Rotating Assembly, Stainless Steel Shaft, Couplings, Packing, 33761 Gpm, 101 Ft Of Head
      For Information...
    • IEN# 126257 - Ahlstrom/Sulzer - ZX 80 Y-2, 36x32-32, Impeller: Staggered, S/S, 31.900", 8-Vane on Each Side, Body: S/S, Weight: 11300 Lbs, Dimension: 84"w, 96"d, 108"h, Capacity: Head: 80 Ft, Flow: 31 700 US gpm, Speed: 580 RPM, Inlet: 36" Outlet: 32",
      For Information...
    • IEN# 126716 - Ahlstrom Model No. ZVV-60; Rotating Assembly; 7-Vane; Split/Staggered/Skewed Impeller 27.75" diameter; Unused storage Room Spare; L-78, W-36, H-36; 1450 Lbs
      For Information...
    • IEN# 126728 - Zander & Ingestrom (JMW) Split Case Pump, Model Z22-808/800, 31.5" Inlet/ Discharge, 28,200 Gpm At 750 Rpm, Stainless Steel Casing, Stainless Steel 6-Vane Impeller, 28 3/8" Diameter, Split, Staggered, Skewed
      For Information...
  • Flow Meters
    • IEN# 120237 - 1" Mag Flow Meter Mfg. Foxboro. Model 8001-WCR-AG. Used in conjunction with Model 8000-SA10-F Flowe Transmitter, for A-1 Check bleed flows.
      For Information...
    • IEN# 120235 - 6" Mag Flow Meter Mfg. Foxboro. Model 2806-SABA-TTA-G. 60 Hertz, 120 Volts, Max Amps: 2.0A, Max Pressure: 240 PSI at 160F, 160PSI at 350F.
      For Information...
    • IEN# 120236 - 1" Mag Flow Meter Mfg. Foxboro. Model 8001-WCR-AG. Used in conjunction with Model 8000-SA10-F Flowe Transmitter, for A-1 Check bleed flows.
      For Information...
    • IEN# 126044 - 6” Foxboro Magnetic Flow Meter; New Unused Surplus; 150 PSI; 10.5 V – DC Electrical; Model: E83 FA6K1ST FAA. This Was A Store Room Item Until A Plant Closure. Sold As-Is.
      For Information...
    • IEN# 126045 - 6” Rosemount Magnetic Flow Meter; 150 PSI; Model #8800A; Type: Smart Vortex; Stainless Steel. 30V – DC Electrical.
      For Information...
    • IEN# 120234 - 12" Mag Flow Meter, Mfg. Foxboro, Model: 2812-SBBA-TSM-G. For use with IMT96 Transmitter for A-1 and A-2 Basis Weight Flow.
      For Information...
    • IEN# 120238 - 0.5" Mag Flow Meter Mfg. Foxboro. Model 280H-SBBA-TPA-G. 60 Hertz, 120 volts, Corrosion resistant construction. Class 150 lbs.
      For Information...
  • Valves
    • IEN# 120215 - 18" Diameter Knifegate Valve. Constructed of Stainless Steel, with a PSI of 150. Bi-directional, bubble tight, OK to 400 degrees F.
      For Information...
    • IEN# 120216 - 8" Diameter Ball Valve Mfg. Jamesbury. Model 7150-31-3600TT-2. With QP5CM spring diaphragam actuator and PMV 2020 positioner 93-15.
      For Information...
    • IEN# 120218 - 8" Diameter Ball Valve Mfg. Jamesbury. Model 7150-31-3600TT-2. With QP5CM spring diaphragam actuator and PMV 2020 positioner 93-15.
      For Information...
    • IEN# 120220 - 6" Diameter Gate Valve. Material: CF8M. Class: 300 lbs. 316 SS body and bolted bonnet, with a Wedge of CF8M.
      For Information...
    • IEN# 120210 - 8" Diameter Knifegate Valve. Constructed of Stainless Steel.
      For Information...
    • IEN# 120212 - 14" Diameter Knifegate Valve. Constructed of Stainless Steel 316, with a PSI of 150. Bi-directional, bubble tight, OK to 400 Degrees F.
      For Information...
    • IEN# 120223 - 12" Diameter Gate Valve, with a PSI of 150 lbs and material cast of A216 C.S. Carbon Steel body with bolted bonnet.
      For Information...
    • IEN# 120214 - 18" Diameter Knifegate Valve. Constructed of Stainless Steel, with a PSI of 150. Bi-directional, bubble tight, OK to 400 degrees F.
      For Information...
    • IEN# 120211 - 14" Diameter Knifegate Valve. Constructed of Stainless Steel 316, with a PSI of 150.
      For Information...
    • IEN# 120221 - 10" Diameter Gate Valve.PSI 600 lbs. Material cast of A216 C.S. 13" Chrome Wedge & Stem.
      For Information...
    • IEN# 120213 - 14" Diameter Knifegate Valve. Constructed of Stainless Steel 316 with a PSI of 150. Bi-directional, bubble tight, OK to 400 degrees F.
      For Information...
    • IEN# 120217 - 8" Diameter Ball Valve Mfg. Jamesbury. Model 7150-31-3600TT-2. With QP5CM spring diaphragam actuator and PMV 2020 positioner 93-15.
      For Information...
    • IEN# 120219 - 14" Diameter Gate Valve. 150 PSI, Material: CF8M. Bi-directional, bubble tight, CF8M Body and bolted bonnet, with 316 SS knife and seat rings. OK to 400 Degrees F.
      For Information...
    • IEN# 120222 - 10" Diameter Gate Valve.PSI 150 lbs. Material cast of A216 C.S. Carbon Steel body with bolted bonnet.
      For Information...
  • Thermocompressors
    • IEN# 126669 - Fisher Thermocompressor, 12" Inlet/Discharge, 6" Motive, With Fisher Actuator Type 667, Bench Set 3-15, Type 3660 Positioner, Flange
      For Information...
    • IEN# 126670 - Fisher Thermocompressor, 5x8", Iron Body, With Fisher Actuator Type 667, Bench Set 3-15, Type 3600 Positioner, Flange
      For Information...
  • Vacuum Pumps
    • IEN# 126276 - Nash, CL, 6002G, S/S 316, Clading: Body Cones, Heads Shaft Diameter: 2.875", Position 4 Test #: Mc 01672, Ratio: 3.6 / 1 ,Drive Gear: 36 Teeth, Driven Gear: 132 Teeth, Vacuum Pump
      For Information...
    • IEN# 126743 - Nash SC3/7 Vacuum Pump; 1170 RPM; Iron NashSC3/7 99D0226
      For Information...
    • IEN# 126278 - Nash, 904 T1, Double Extended Shaft Vacuum Pump, 316 Ss, Heads, Cones, Rotor and Body in SS, Test Number: 89c0065, Position: 4 303 Rpm,
      For Information...
    • IEN# 123863 - Nash CL 9002 Vacuum Pump. Year Manufactured 1996. Quantity Two.
      For Information...
    • IEN# 126273 - Nash, CL-402, Test: 93E8818, Inlet: 3", Outlet: 2.5", Center to Center Inlet and Outlet: 18",Vacuum Pump,
      For Information...
    • IEN# 120689 - Vacuum Pump Mfg. Nash, Model: 904-RG.
      For Information...
    • IEN# 120687 - Vacuum Pump Mfg. Nash, model: 904-M1.
      For Information...
    • IEN# 124170 - CL-2002 Nash Vacuum Pump. Includes: GE 150HP, 1190 Rpm, 460 Volt, Rpm 590 Motor. Test #96Z03109,
      For Information...
    • IEN# 120790 - Nash CL 9001 Liquid Ring Vacuum Pump. Quantity (2)
      For Information...
    • IEN# 123847 - Nash Vacuum Pump, Model SC3SS, Position Four. All Stainless Steel Construction.
      For Information...
    • IEN# 120778 - Nash 6001 DH Vacuum Pump, Test# 06BH3875; Year 2006
      For Information...
    • IEN# 126268 - Nash H9 YEAR: 2007 Part #: 81U3645 Rebuilt by Nash,made In: USA Vacuum Pump
      For Information...
    • IEN# 123871 - Nash Model CL 9002 Vacuum Pump. Manufactured In 2006.
      For Information...
    • IEN# 126274 - Nash, Cl-701, Test: Mc 01904,Vacuum Pump
      For Information...
    • IEN# 123856 - Nash CL 3002 Vacuum Pumps. Listed In Good Condition. Year Manufactured 1994. Position 1. 400 RPM.
      For Information...
    • IEN# 120764 - Nash 4001 Liquid Ring Seal Vacuum Pump, Year 2004, Test# 04BH3391
      For Information...
    • IEN# 126272 - Gardner Denver, Sap 220, Blower Model: Sap 220, Connection: Inlet: 2" ,Npt Outlet: 2", Npt 3.5hp, 575v 60hz +240 - 250, Mbar 275 M_/h (max) ,New Store Surplus,Vacuum Pump,
      For Information...
    • IEN# 124178 - CL-14002 Nash Liquid Ring Vacuum Pump, RPM: 300, Test #81S0156
      For Information...
    • IEN# 126744 - Nash Vacuum Pumps CL 702 Vacuum Pump; Iron Casting
      For Information...
    • IEN# 126269 - Somarakis, 3002, Complete Kit: Frame - Motor - Pump - Control Motor Ac -,Baldor ,200 Hp, 1185 Rpm ,Frame: 449t, 460 Volts Enclosure: Tefc, Service Factor: 1.15
      For Information...
    • IEN# 126267 - Nash, CL4001, Year: 2012 Rebuilt by ECM, Made In: Usa, Vacuum Pump
      For Information...
    • IEN# 126270 - Nash, SC6, Test #: 89v033-bh5212, Vacuum Pump
      For Information...
    • IEN# 124177 - CL-9001 Nash Liquid Ring Vacuum Pump
      For Information...
    • IEN# 126277 - Nash, CL 6002G, Test #: 69c-0105, Ratio: 3.6 / 1, Drive Gear: 36 Teeth, Driven Gear: 132 Teeth,Vacuum Pump
      For Information...
    • IEN# 123872 - Nash Model CL 9002G Vacuum Pump. Position 1. Manufactured In 2000. Test# 00M45122.
      For Information...
    • IEN# 123869 - Nash CL 14000 Vacuum Pumps. Quantity Two. Position One. Manufactured In 1994.
      For Information...
    • IEN# 126271 - Nash, AHF 75, Stainless Steel, Pump Shaft Diameter :1.125" ,Capacity: 27.5" Hg 55 - 76 Cfm @ 22" Hg 3 - 5 Hp, Inlet: 2", Npt Outlet: 2", Npt 3 Gpm Seal Water Used,Vacuum Pump
      For Information...
    • IEN# 126739 - Nash Model 2BE3 72 Vacuum Pump Endshield head; Iron; Unused Storeroom Spare
      For Information...
    • IEN# 126745 - Nash CL 402 Vacuum Pump; Iron; 1170 RPM
      For Information...
    • IEN# 126275 - Nash, CL3003, Test #: 9720126, Rpm: 500, C.i. ,Vacuum Pump
      For Information...
    • IEN# 126740 - Somarakis Vacuum Pump Model No. 6000 CFM; POS. 1; CL 6002 Equivalent; 10Õ to 20" Mercury; Directly Interchangable w/ A Nash CL 6002 Series;
      For Information...
  • Roll Splitters
    • IEN# 126720 - James Brinkley 73" Roll Splitter, 50" Max Roll Diameter, With Storeroom Spare Blade, With Hydraulic Systems Inc Hydraulic Unit, Hsi P/N 29033, Tank Cap 30 A Gal, Pump Flow 16 Gpm, Max Pressure 900 Psi, With Teco 3-Phase Induction A/C Motor, Type...
      For Information...
  • Roll Grinders
    • IEN# 124023 - 292” Length 42”/60” Diameter, Farrel Corporation Heavy Duty 2 wheel Roll Grinder with floating heads. Capacity: Max. Roll Dia., on center with full size wheel- 42”; Max. Roll Dia., above centerline- 60”; Min. Roll Dia., ground on centerline- 7”;...
      For Information...
  • Gear Reducers
    • IEN# 126007 - 1500 hp Falk Gear Reducer, Model 2135Y1-LS1; Ratio 3.433; RPM IN 1750; RPM OUT 510.
      For Information...
    • IEN# 126006 - 1500 HP Falk Gear Reducer, Model 2135Y1-LS2, Ratio 3.433; RPM IN 1750; RPM OUT 510.
      For Information...
    • IEN# 126709 - Falk Model No.2110y1-LD Gear Drive 7.786/1 Ratio; 1197v Input RPM;153.7 Output RPM; 268 Service Rating HP; 1.34 Service Factor; 8.5 US Gallons, W/ Base; L-115, W-70, H-55
      For Information...
    • IEN# 125995 - 1950 HP Hansen gear reducer, ratio 9.7583 to 1, model RDK21-BN-10.
      For Information...
    • IEN# 126008 - 1500 hp Falk Gear Reducer, Model 2135Y1-LS3, Ratio 3.433; RPM IN 1750; RPM OUT 510.
      For Information...
    • IEN# 126279 - 300 HP Falk Model 2137Z2-S, Pendulant Gear Reducer, Ratio: 11.862, Input RPM: 1150, Output RPM: 97.0, Service Factor: 1.99. Yankee Dryer Gear Reducer. Tissue Machine Gearbox.
      For Information...
    • IEN# 126706 - Falk Model No. 2100Y1-LD; Gear Drive 6 .786/1 Ratio; 1200 Input RPM 176.8, Output RPM 153; Service Rating HP 2.2; Service Factor 6.8 US Gallons; w/ Base; L-100, W-70, H-50
      For Information...
    • IEN# 126009 - 1500 hp Falk Gear Reducer, Model 2135Y1-LS2, Ratio 3.433; RPM IN: 1750; RPM OUT: 510.
      For Information...
  • Heat Exchangers
    • IEN# 126672 - Mueller Accu-Therm Plate Heat Exchanger, Model At40 F-20, Max W.p. 100 Psi @ 120 F, National Board #: 10736
      For Information...
    • IEN# 126676 - Alfa Laval Plate and Frame Heat Exchanger 754.1 SQ FT Area; 150 PSI, 113 Plates; Model No. M15-MFG; L-90, W-40, H-80
      For Information...
    • IEN# 126163 - 3,439 Sq.Ft. Alfa Laval Compabloc Heat Exchanger, Year 2013, Unused, Model CPX75-V-500, Surface Area: 3,439 SF., Vertical. Carbon steel shell, A side rated 500 psi/full vacuum at -20 to 350 degrees F. (500) 316L Stainless steel plates, B side rated...
      For Information...
    • IEN# 126174 - 1160 Sq.Ft. Graham Corporation Multi-Pass Shell & Tube Heat Exchanger, Surface Area: 1160 SF, Horizontal. UNUSED Condition. Carbon steel shell rated Full Vacuum & 20 psig at 250 degrees F. (370) 3/4” Diameter x 16” long 304 stainless steel tubes...
      For Information...
    • IEN# 126677 - Alfa Laval Plate And Frame Heat Exchanger, Model Am20-Sfg, Surface Area 561.2 Sq Ft, Max Working Pressure 100 Psi At 100 F, Min Design Met'l Temp -5 F At Design Pressure 100 Psi, Plates 1mm Thick, Cap 143.22 Us Gal, National Board Number 8547
      For Information...
    • IEN# 126173 - 1160 Sq.Ft. Graham Corporation Multi-Pass Shell & Tube Heat Exchanger, Surface Area: 1160 SF, Horizontal. UNUSED Condition. Carbon steel shell rated Full Vacuum & 20 psig at 250 degrees F. (370) 3/4” Diameter x 16” long 304 stainless steel tubes...
      For Information...
    • IEN# 126165 - 1350 Sq.Ft. Alfa Laval Plate Type Heat Exchanger, Model AM20-FG, Surface Area 1,350 Square Feet, 316 Stainless Steel. (159) 0.8mm Thick plates rated 78 psi at 248 degrees F. (4) 8” Inlets/outlets. Carbon steel expandable frame on carbon steel base....
      For Information...
    • IEN# 126162 - 3,439 Sq.Ft. Alfa Laval Compabloc Heat Exchanger, Year 2013, Unused, Model CPX75-V-500, Surface Area: 3,439 SF., Vertical. Carbon steel shell, A side rated 500 psi/full vacuum at -20 to 350 degrees F. (500) 316L Stainless steel plates, B side rated...
      For Information...
    • IEN# 126164 - 1,129 Sq.Ft. Plate and Frame Heat Exchanger, Maximum Working Pressure 100 PSI at 200F, Minimum Temperature -5F at 100 PSI. Total Surface Area 1,129 SF. Total of (74) 1.0mm Plates, A Dimension 912mm.
      For Information...
    • IEN# 126727 - Alfa Laval Heat Exchanger; Maximum Working Pressure 100 PSI @200F; Minimum Temperature -5F @ 100 PSI; TL Square Ft 1129.8; 74 1.OMM Plates; ÒA" Dimension 912MM; Alfa Laval Ma30-SFM 30103-94186
      For Information...
    • IEN# 126171 - 81 Sq.Ft. Superchanger Plate Heat Exchanger, Model S3-HJ-26, Year 2000, 100 PSI @ 330F, Plate Pack Dim. (inch): Min 4.99 Max. 5.10.
      For Information...
    • IEN# 126172 - 120 Sq.Ft. Superchanger Plate Type Heat Exchanger, Model UX-125SP-60, Three (3) Available, Rated at 200 PSI @ 350F, Year 1992.
      For Information...
    • IEN# 126696 - Mueller Model Ac217 B-150 Accu-Therm Plate And Frame Heat Exchanger, 150 Mwp, 190 F, 32 Mdmt At 150 Psi, Built In 2012, 370 Plates Total, 5732 Sq/Ft Surface Area, Inlet And Outlet 8.25" Id
      For Information...
    • IEN# 126170 - 81 Sq.Ft. Superchanger Plate Heat Exchanger, Model S3-HJ-26, Year 2000, 100 PSI @ 330F, Plate Pack Dim. (inch): Min 4.99 Max. 5.10.
      For Information...
  • Spiral Heat Exchangers
    • IEN# 126167 - 1,320 Sq.Ft. Alfa Laval Spiral Heat Exchanger, 304 SS Shell, 125 FV Psi @ 325F, 20F @125 FV psi, Manufacture Age 1996, Type 1H, Head Material SA-516-70, Shell Material SA-240-304.
      For Information...
    • IEN# 126169 - 995 Sq.Ft. Alfa Laval Spiral Heat Exchanger, Type 2VH, Manufactured in 1988, Construction 316 SS Shell, Head material SA-516-70; Shell material SA-240-316; 75 PSI @ 200F.
      For Information...
    • IEN# 126168 - 515 Sqft. Alfa Laval Spiral Heat Exchanger, Type 1HL1W, Surface Area: 515 sqft., Manufactured Year 2005, Shell 316L SS Construction, 100 PSI @ 350F, -7F @ 100 PSI.
      For Information...
    • IEN# 126166 - 1120 Sq.Ft. Alfa Laval Spiral Heat Exchanger, 1120 square feet surface area, Type Spiral. Manufactured in 2003, 100 psi @ 200F, -7F @ 100psi.
      For Information...
  • Paper Machine Scanner
    • IEN# 126000 - 86" Measurex scanner, paper machine gauging system for basis weight control and sheet quality. Complete with documentation and available spare parts.
      For Information...
  • Agitators and Mixers
    • IEN# 120380 - Agitator, 75C10, 10 HP, 3x381 shaft, 2 88" impellers, 14" mounting flange.
      For Information...
    • IEN# 120381 - Agitator, 74S2, 3.5x238 shaft, 14" mounting flange.
      For Information...
    • IEN# 118244 - Mixer; Hp 3; Model SGS-300; Lightnin; Shaf tLength 24 in; Serial Number 81/103328-01; Shaf tDiameter 1.5 in; 3 Blade Prop-Approx 16" Diameter, W/GE 3 Hp Motor, 3 Phase, 60 Hz, 230/460 Volts, 9.2/4.66 Amps, 1755 Rpm, Cont Duty @ 40° Max Amb, Frame
      For Information...
    • IEN# 120379 - Agitator, 75C15, 15 HP, 3x377 shaft, 2 88" impellers, 14" mounting flange
      For Information...
    • IEN# 120385 - Agitator, X5C100, 1 HP, 1x65 shaft, 1 17" impeller, 6" mounting flange
      For Information...
    • IEN# 126013 - Impco Pulp Mixer Model 500, single shaft, 24" inlet, 24" outlet, 92" long body, side discharge.
      For Information...
    • IEN# 118246 - Mixer; Hp 5; Model 74Q5; Lightnin; ShaftLength 138 in; InputRpm 1700; OutRpm 25; Ratio 68.2; SerialNumber 7112754; Paddle Diameter 30"*; Motor not included
      For Information...
    • IEN# 120384 - Agitator, X5C100, 1 HP, 1.25x83 shaft, 1 15.1" impeller.
      For Information...
    • IEN# 126735 - Lightnin Agitator Drive, Model 825 0 200, 20.3/1 Ratio, 200 Hp Rating, 86 Rpm, Cw Rotation
      For Information...
    • IEN# 118248 - Ross Model ME-405 5 Hp, SS, Serial #10118; Inline Mixer w/5 Hp AC Motor for Hazardous Locations, Class 1, Reliance Frame X184TD, 230/460 Volts 3 Phase TEFC
      For Information...
    • IEN# 120386 - Agitator, 75C15, 15 HP, 1 100" impeller.
      For Information...
    • IEN# 120383 - Agitator, 98C60, 60 HP, 6x898 shaft, 1 138" impeller, 16" mounting flange.
      For Information...
    • IEN# 118247 - Mixer; Hp 5; Model 74Q5; Lightnin; ShaftLength 138 in; InputRpm 1700; OutRpm 25; Ratio 68.2; SerialNumber 7112754; Paddle Diameter 30"*; Motor not included
      For Information...
    • IEN# 120382 - Agitator, 98C60, Quanity Three (3), 60 HP, 6x882 shaft, 1 138" impeller, 16" mounting flange.
      For Information...
    • IEN# 118245 - Mixer; Hp 3; Model SGS300; Lightnin; Shaft Length 24 in; Serial Number 81/103328-02; Shaft Diameter 1.5 in; W/Reliance 3 Hp Motor, Ident B76R7350N-RG, Type P, Frame 180TZ, 3 Phase, 60 Hertz, 1725 Rpm, Volts 230/460, Amps 9/4.5, Code K, Cont Duty...
      For Information...
    • IEN# 120387 - Agitator, 20P-TMH5, 5 HP, Quantity Four (4), 1 20" impeller, 4" mounting flange.
      For Information...
  • Slurry Pumps
    • IEN# 123849 - Goulds Model 5500 Hard Metal Slurry Pump. Size 10 X 12 – 25. Max 6000 GPM, 80 Fthd., 21" Impeller Dia., RPM 880.
      For Information...
  • Centrifugal Pumps
    • IEN# 120770 - Gould 3175 Centrifugal Pump. Size 14 x 14 - 22, Metalurgy: 316 SS.
      For Information...
    • IEN# 126710 - Goulds Model No. 3410 Split Case Pump 12x14x15; CF8M Stainless Steel Casing; 7-Vane Singe Straight Stainless Steel Impeller; 13.75" Impeller Diameter
      For Information...
    • IEN# 120226 - 3x4" Centrifugal Pump Mfg. Buffalo with an Impeller of 8 7/8" and a GPM of 432.
      For Information...
    • IEN# 124172 - Roto Jet Model: RGB-3x2-D600 High Pressure Pump, GPM: 300, Ft Head: 1960, Size: 3x2 in, RPM: 4380, CIP Pumps, Specific Gravity 1.0. QTY(3).
      For Information...
    • IEN# 120774 - Ahlstrom 54-20 Pump, 316 SS
      For Information...
    • IEN# 126683 - Ahlstrom TRS-35 Pump, Stainless Steel Casing, Stainless Steel Suction Side Plate, 5-Vane Stainless Steel Impeller, Stainless Steel Stuffing Box, Mechanical, 60 Ft Of Head, 3500 Usg/Pm, 890 1/Min
      For Information...
    • IEN# 120775 - Ahlstrom 61-20 Pump, 316 SS
      For Information...
    • IEN# 126703 - Sulzer Apt11-1a Pump, 60 Usgpm, 39 Ft/Head, Astm A890 Stainless Steel Casing, 3-Vane, Stainless Steel Impeller, Mechanical Seal, With Siemens 3 Hp Ac Motor, 1760 Rpm, 460 Volts, Unused Storeroom Spare
      For Information...
    • IEN# 120225 - 3x4" Centrifugal Pump Mfg. Buffalo with an Impeller of 8 7/8" and a GPM of 432.
      For Information...
    • IEN# 120159 - Voith Model 635 DK 70/90, Year 1989. Flow: 32921 GPM at 100 Feet Head. 1200 HP / 880 RPM. Discharge Diameter: 70cm (27.56"). Suction Diameter: 90cm (35.43").
      For Information...
    • IEN# 126707 - Goulds 3410 6x8x14 Split Case Pump, Cfgm Casing, 5-Vane 12.25" Diameter Single Straight Impeller, 1300 Gpm
      For Information...
    • IEN# 120773 - ITT Goulds, Model 5500; Size 10 x 12 - 25; 5000 GPM; 80 Ft Hd; 21" Impeller.
      For Information...
  • Thick Stock Pumps
  • Canister Filters
    • IEN# 126721 - AES 20 Bank Canister Filters with Auto Back Flush System; L-120, W-56, H-80; 2870 Lbs
      For Information...
  • Reverse Osmosis System
    • IEN# 126016 - Demineralized water system, 167 GPM, Reverse Osmosis Skid with anti-scalant chemical injection system. Manufacture Tenergy Christ. Includes controls: Alan Bradley micrologix 120 PLC, with (2) 60" multimedia filters, in excellent condition, year 2004.
      For Information...