http://www.convertingplant.com
  • English
  • Spanish
  • Chinese

Equipment Listings - Stock Preparation Equipment

  • Pulper Detrasher
    • IEC# 124209 - Beloit 44" 304 SS Model 4996 Belcor detrasher. 250HP V-Belt Drive. Manufactured 1981. Chamber capacity approximately 90 Cu. Ft. (2.55 cu.m.). Low profile impeller. Extraction plate with 5/32" (3.97mm) diameter holes. 8" (203mm) inlet, 14"...
      For Information...
    • IEC# 124208 - Ultrasorter Size 30 Tailings Screen by Black Clawson . New 2000. 316L Stainless Steel Construction. Belt driven, 50 HP, 1200 RPM motor. 2 ½% Maximum feed consistency. Approximately 30 BDTPD but capacity will vary according to the specific...
      For Information...
    • IEC# 126090 - Fiberprep Model 2B Scavenger. Constructed of 316 Stainless Steel. Manufacturer is Fiberprep. Max pressure is 20 PSI. Quantity One (1).
      For Information...
  • Stock Cleaners
    • IEC# 125996 - Low density Centrifugal Cleaners, 15 cones, manufactured by ELP Products, model 2400.
      For Information...
    • IEC# 124210 - Ahlstrom Model RB300 HD high density cleaner with Junk Trap stainless steel 4" (101mm)
      For Information...
    • IEC# 123868 - HYMAC Four Stage Stock Cleaners. Eight Banks Of Cleaners, Stainless Steel Construction. One Set Primary Banks, Two Sets Secondary Banks, One Set Tertiary Banks.
      For Information...
    • IEC# 126144 - CleanPac 350 Cleaners, Manufactured by Cellaco, Material Plastic, Primary Bank of (96) Cleaners. Double Sided. Total of (15) 5" Diameter, Length 30" Cleaners; Total of (81) 4" Diameter, Length 26" Cleaners, Material Plastic, Model CleanPac 350.
      For Information...
    • IEC# 124189 - Ahlstrom Model #RB45-112, Stock Cleaners, Year 1999, AHL Cleaner, 112 Slots.
      For Information...
    • IEC# 124186 - Ahlstrom Model #RB45-120, Stock Cleaners, Year 1999, AHL Cleaner, 120 Slots.
      For Information...
  • Pulper Parts
    • IEC# 126019 - Black Clawson # 3 Pulper Drive. Ratio 4.1.
      For Information...
    • IEC# 124193 - #2 Black Clawson Hydrapulper Drive Gearbox, 3.53 to 1 Ratio. Quantity (1)
      For Information...
    • IEC# 126020 - 200 HP Falk Gear Reducer. Right-Angle Pulper Drive. Vertical output, Ratio 3.41; RPM IN: 1775 / RPM OUT: 521.2; S.F. 1.5.
      For Information...
    • IEC# 126022 - Voith pulper drive. Ratio 3.88; Bull gear 97 teeth; Pinion gear 25 teeth; model GV15.
      For Information...
    • IEC# 126021 - 300 HP Falk pulper Drive, ratio 6.301; model 388AFXU2AS. Unused in storeroom condition.
      For Information...
  • Deflakers
    • IEC# 118300 - Deflaker; Hp 100; TPDCapacity 125; Material SSLined; Beloit; Model 2810; Psig 50; Refiners; Volts 460; Beloit Jones, Dispersall I, 24" Jordon, Mfg Date 1984, With Siemens Allis 100 Hp, Induction Motor, 1780 Rpm, 460 Volt, 405T Frame, TEFC,...
      For Information...
    • IEC# 123744 - Voith E2K Deflaker, Material SS, 250 HP, Year 1994. Includes base and 250 HP Motor,1785 RPM, 2300 Volt, 60 Hz. Quantity Four (4)
      For Information...
    • IEC# 120798 - Voith Model E2K Deflakers in very good condition. Three available. One with new internals. Also available is a spare 316 SS new casing. Contact us for pictures and details.
      For Information...
  • Defibrators
  • Disk Refiners
    • IEC# 126005 - Beloit Jones series 3000 20" disc refiner, Mono flow.
      For Information...
    • IEC# 120794 - 20" Sprout Waldron EMA Disk Refiner
      For Information...
    • IEC# 123866 - Beloit Jones 34 Inch DD Model 3500 Disc Refiner. Recently Upgraded From A 3000 Series This Refiner Is Electro Mechanically Actuated And In Good Condition. Upgraded In 2005.
      For Information...
    • IEC# 126191 - 45-1B Sprout Waldron Disk Refiner, Completely Rebuilt, Immediately Available. Operates at 2500 HP, and 4000 Volt.
      For Information...
    • IEC# 126190 - 42" Twin Flow EMA, Sprout Waldron, Completely Rebuilt. Immediately Available. This unit was completely disassembled and a full comprehensive inspection performed. Including NDT of critical parts. Includes a new shaft installed and a repaired...
      For Information...
    • IEC# 120783 - Sulzer Escher Wyss Disperger, Model # HD3; Year 1991, Material: 316 SS.
      For Information...
    • IEC# 123867 - Beloit Series 4000 DD 34 Inch Disc Refiner. Model Number 4334S.
      For Information...
    • IEC# 123845 - Black Clawson Hydra Flaker Model 400.
      For Information...
    • IEC# 126189 - 45-1B Disk Refiner, Andritz, 4000 HP, Completely Rebuilt. To Include: Disassembly, inspection, and rebuild of the Rotor Sleeve Fit, Stator, Disc Face, Base with new custom oil hoses, FE Pedestal, TE Pedestal, Swing Door / Plate Holder, Plate...
      For Information...
    • IEC# 126192 - Twin 50 Disk Refiner, Sprout Waldron / Andritz. This machine has been professionally dismantled and rebuilt. The refiner is immediately available to put into service. Includes Feeder Assembly and Steaming Tube.
      For Information...
    • IEC# 126018 - 34" Pilao RTD tri-disc refiner. SS Lined.
      For Information...
  • Pressure Screens
    • IEC# 120182 - Bird CN70 Headbox Pressure Screen, 225 RPM. Comes with 200 HP Motor, Rotation CCW, 60 PSI. Basket with .018" Slots included.
      For Information...
    • IEC# 120153 - Pressure Screen Mfg. Fiberprep , Model: SPM600, Metalury: 316 SS. This unit is a Belt Drive with Motor.
      For Information...
    • IEC# 126010 - UV 100 Pressure Screen, Black Clawson, 4-foil rotor, 316 SS construction.
      For Information...
    • IEC# 123858 - Model 24 PH PS Pressure Screen, Mfg. Kadent Black Clawson. Belt Drive with Motor, 316 SS Construction. Quantity: Three(3) Available.
      For Information...
    • IEC# 120157 - Pressure Screen Mfg. Impco , Model: 208H Slotted Tertiary Screen, Metalury: Stainless Steel.
      For Information...
    • IEC# 126015 - Beloit model MDS 24 horizontal pressure screen, 316SS construction.
      For Information...
    • IEC# 124196 - Ahlstrom model F2 pressure screen, type AHLsorter, year 1991. With General Electric 75 HP, 3/60/460V, 1190 rpm motor. New 1991. Mfr. # 943
      For Information...
    • IEC# 120755 - Bird Model 200 Screen , Quantity (1)
      For Information...
    • IEC# 120754 - Bird Model 900 Screen, Quantity (1)
      For Information...
    • IEC# 119218 - Pressure Screen mfg. Fiberprep Model# SPM 600 with 0.010" slot basket.
      For Information...
    • IEC# 120789 - Black Clawon 24 PS PH Pressure Screen, Belt Drive, 316 SS Body, Qty (2)
      For Information...
    • IEC# 126012 - Bird 8 Pressure Screen, 316 SS Casing, 2–foil 316 SS Rotor and Basket, .078" Holes, Belt Drive on base includes 15 HP reliance motor 575v, 60 HZ, 1160 RPM.
      For Information...
    • IEC# 124197 - Ahlstrom Mdl FS-4 fiber screen. Stainless steel. No motor. New 1991.
      For Information...
    • IEC# 119206 - Pressure Screen mfg. Bird, Model# 40B. This unit has a GPM of 2400/12000 and is made of stainless steel. Hole Diameter .078 in · Weight 6840approx lbs · 12% Open Area ·
      For Information...
    • IEC# 124151 - Beloit Model: S18A Horizontal Pressure Screen. Low Pulse Design. Body constructed of 316 SS, Screen basket 316SS. 50 HP. Qty. (1).
      For Information...
    • IEC# 126017 - Beloit M32 horizontal pressure screen, M-R Series,pulp application. Stainless steel construction.
      For Information...
    • IEC# 120797 - Fiberprep SPM 800, 60 PSI, 316 SS Construction; Belt Drive; Qty (2).
      For Information...
    • IEC# 120154 - Pressure Screen Mfg. Fiberprep , Model: SPM800, Metalury: 316 SS. This unit is a Belt Drive with Motor.
      For Information...
    • IEC# 120796 - Fiberprep SPM 600, 80 PSI, 316 SS Construction; Bump Rotor; Belt Drive; Qty (2). Also available spare bump rotor.
      For Information...
    • IEC# 120749 - Voith Model VPS 20 screen, Quantity Two (2)
      For Information...
    • IEC# 120781 - Fiberprep SPH-1500 Primary Screen; 60 PSI; Stainless Steel Construction
      For Information...
    • IEC# 120788 - Beloit M-50 Horizontal Pressure Screen
      For Information...
    • IEC# 126014 - Beloit model MDS 24 horizontal pressure screen, 316SS construction.
      For Information...
    • IEC# 118571 - MFG: BLACK CLAWSON • MODEL: ULTRA I • 4-BLADE ROTOR • MATERIAL: STAINLESS STEEL •
      For Information...
    • IEC# 119214 - Pressure screen mfg. Fiberprep SPM H1000. This unit features a slot type basket of 0.010" with an inlet of 16".
      For Information...
    • IEC# 119212 - Pressure Screen mfg. Bird. This unit has a GPM of 2400/12000, Model# 40B and is made of stainless steel. Hole Diameter .078 in · Weight 6840approx lbs · 12% Open Area ·
      For Information...
    • IEC# 124198 - Bird Model 400 Centrisorter. All stainless steel construction. Rated for 150 PSI. Belt driven by a 125 HP, 3/60/460 volt, 1785 RPM, frame 8444T motor. Rated for 4000 GPM. Capacity will depend on the particular application. Stainless steel...
      For Information...
    • IEC# 120751 - Ahlstrom model F4 screen, Quantity (1)
      For Information...
    • IEC# 120155 - Pressure Screen Mfg. Bird , Model: 14, Metalury: 316 SS. This unit is a Belt Drive.
      For Information...
    • IEC# 123857 - Bird Model 900 Omni Screen. 75 PSI, Max RPM: 450, 316 SS Construction, Belt Drive.
      For Information...
    • IEC# 120767 - Hooper PSV Series II F16 Pressure Screen, Model PSV-2200, Year 1991, Quantity (2)
      For Information...
    • IEC# 124242 - Aikawa Model MXS 400M Stainless Steel Pressure Screen. Tailing Screen, Dual Dilution with a 0.17mm (.0067”) Slotted Screen Basket. Comes on a base with a 30HP, 460V, 1775 RPM GE Motor. Inlet and Outlets 8” Diameter, 3” Diameter Outlet for Heavy...
      For Information...
    • IEC# 126011 - 12NP Pressure Screen, Black Clawson, 4-foil rotor, Belt Drive, MAWP 75 PSI.
      For Information...
    • IEC# 120768 - Bird 200 Centrisorter with Spare Bump Rotor
      For Information...
    • IEC# 123844 - Bird 400 Centrifilter Pressure Screen. 316 Stainless Steel. Manufacturer Bird Escher Wyss. Max Operating Pressure 150 PSI, Max RPM 1100. Belt Drive Motor Included.
      For Information...
    • IEC# 123851 - Black Clawson Model 24P Pressure Screen, Stainless Steel Construction with Gear Drive.
      For Information...
    • IEC# 119226 - Bird CN70 Headbox Pressure Screen, 225 RPM. Comes with 200 HP Motor, Rotation CCW, 60 PSI. Basket with .018" Slots included.
      For Information...
    • IEC# 124149 - Beloit Model M24 Pressure Screen. Body Constructed of 316SS, Basket is 316SS. S/N: SM218.
      For Information...
    • IEC# 120181 - Bird CN70 Headbox Pressure Screen, 225 RPM. Comes with 200 HP Motor, Rotation CCW, 100 PSI. Basket with .018" Slots included.
      For Information...
    • IEC# 124199 - Sunds T6 vertical stainless steel LITEFLO Delta screen. Manufactured 1998. Belt driven by a 125 HP motor and equipped with a stainless steel screen basket with .010" (0.25mm) slots and cylone. 10" (254mm) Feed, 8" (203mm) accepts, and 6" (152mm)...
      For Information...
    • IEC# 120720 - Beloit M44 Primary Screen
      For Information...
    • IEC# 123855 - Bird Model 50 Pressure Screen, Mfg. Bird Escher Wyss, 316 SS Construction, Belt Drive. Screen Is Complete With Basket.
      For Information...
  • Pulpers
    • IEC# 124043 - 5' Diameter, Black Clawson Hydra-Pulper, Height: 110"; Vokes Rotor: 24" Dia, Stainless Steel Construction, Bottom Mounted Rotating Assembly, Stainless Steel Tub. Belt driven 125HP, 1775 rpm motor.
      For Information...
    • IEC# 126198 - 675 ADSTD Andritz Fibreflow 350 Drum Pulper, 3.5 Meter Diameter Drum. Pulper drum construction is 316 SS, 81' Length x 11.5' Diameter. Complete pulper includes drive and lubrication system. It has a counter clockwise rotation looking at the...
      For Information...
    • IEC# 124225 - Fiberprep wet strength pulper with Helico rotor for high consistency pulping. Capacity 3.25 BDMT per batch; 500 HP Drive with Gearbox; Pulper dimensions: 11.8 feet diameter by 8.75 feet height. Total batch time including reloading and idle is 95...
      For Information...
    • IEC# 126194 - 400 TPD Voith High Consistency Batch Pulper, New/Unused Surplus Equipment. Pulper Tub 316 SS. High Cone Rotor 316 SS. Designed to Pulp Mixed Office Waste at 17.3% Consistency. Dimensions: 18’-8” Pulper Tub Diameter. OAH: 18’-4”. Inside Height:
      For Information...
    • IEC# 126089 - 8' Hymac Turboflex Pulper (Model 8-1B36). This pulper has a full Stainless Steel Tub and is a Belt Drive configuration.
      For Information...
    • IEC# 126036 - 135 TPD Market Pulp Stock Prep System Includes: One (1) Voith VSH0012 – 12' Diameter Pulper; One (1) Voith KF-S Stacked Bale Conveyor; One (1) Voith KF-DE Bale Stack Downender; One (1) Voith GF-G – 42” x45' Belt Feed Conveyor for Pulper; Two (2)...
      For Information...
  • Vibrating Screens
    • IEC# 120166 - 48" Vibrating Screen Mfg. Sweco with a 2.5 HP motor. Model# US48D815. Size: 1160 RPM, 575 Volts.
      For Information...
    • IEC# 120170 - 48" Vibrating Screen Mfg. Sweco with a 2.5 HP motor. Model# US48D815. Size: 1160 RPM, 575 Volts.
      For Information...
    • IEC# 120173 - 48" Vibrating Screen Mfg. Sweco with a 2.5 HP motor. Model# US48D815. Size: 1610 RPM, 575 Volts.
      For Information...
    • IEC# 120175 - 30" Vibrating Screen Mfg. Sweco with a 0.5 HP motor. Model# LS30S66HS. Size: 1800 RPM, 575 Volts.
      For Information...
    • IEC# 120176 - 30" Vibrating Screen Mfg. Sweco with a 0.5 HP motor. Model# LS30D610. Size: 1140 RPM, 575 Volts.
      For Information...
    • IEC# 118279 - Vibratory Screen; Sweco; Model ZS30S666; Hole Diameter Fine Mesh; Mill Number None; Serial Number 65180A494; Size 30 in; Motor Information: Sweco, Hp .5, Ph3, Frame 143TZX, Hz 60, Code M, Rpm 1160, type TFN, Des B, Ins Cl F, Cont Duty @ 40°C max...
      For Information...
    • IEC# 120177 - 30" Vibrating Screen Mfg. Sweco with a 0.5 HP motor. Model# LS30D610. Size: 1140 RPM, 575 Volts.
      For Information...
    • IEC# 124201 - Bird model 24 Jonsson stainless steel vibrating screen. Equipped with a 3/8" Diameter Holes, 316 SS screenplate. Cleaned & painted.
      For Information...
    • IEC# 120168 - 48" Vibrating Screen Mfg. Sweco with a 2.5 HP motor. Model# US48S88. Size: 1160 RPM, 575 Volts.
      For Information...
    • IEC# 118276 - Vibratory Screen; Midwestern Industries Inc; Model ME48S8-14; Hole Diameter Fine Mesh; Dewatering Equip; Hp 3; Serial Number 0185-4001; Serial Number 0185-4003; Size 48 in; Volts 230/460; 2 Decks
      For Information...
    • IEC# 120171 - 48" Vibrating Screen Mfg. Sweco with a 2.5 HP motor. Model# US48D88. Size: 1160 RPM, 575 Volts.
      For Information...
    • IEC# 118278 - Vibratory Screen; Sweco; Model R48C245; Hole Diameter .75 in; Dewatering Equip; Frame 213; Hp 2.5; Material SS; Rpm 1120; Size 48 in; Volts 230/460; 1 Deck
      For Information...
    • IEC# 120167 - 48" Vibrating Screen Mfg. Sweco with a 2.5 HP motor. Model# US48D815. Size: 1160 RPM, 575 Volts.
      For Information...
    • IEC# 118277 - Vibratory Screen; Midwestern Industries Inc; Model 48S8-8; Hole Diameter Mesh; Amps 8.4; Dewatering Equip; Hp 3; Mill Number None; Serial Number 1186-4092; Size 48 in; Volts 230; 2 Decks Screen Needs Repair w/3 Hp Motor TEFC Amps 8.4/4.2, Volts...
      For Information...
    • IEC# 121150 - Bird Johnnsn Model 24 stainless steel vibrating screen. Equipped with a 1/8" (0.125") hole diameter drilled stainless steel screenplate.
      For Information...
    • IEC# 120174 - 30" Vibrating Screen Mfg. Sweco with a 0.5 HP motor. Model# LS30S66HS. Size: 1800 RPM, 575 Volts.
      For Information...
    • IEC# 120169 - 48" Vibrating Screen Mfg. Sweco with a 2.5 HP motor. Model# US48D815. Size: 1160 RPM, 575 Volts.
      For Information...
    • IEC# 120165 - 48" Vibrating Screen Mfg. Sweco with a 2.5 HP motor. Model# US48S88HS. Size: 1712 RPM, 575 Volts.
      For Information...
    • IEC# 120164 - 48" Vibrating Screen Mfg. Sweco with a 2.5 HP motor. Model# US48D815. Size: 1160 RPM, 575 Volts.
      For Information...
    • IEC# 120178 - 30" Vibrating Screen Mfg. Sweco with a 0.5 HP motor. Model# LS30S66HS. Size: 1800 RPM, 575 Volts.
      For Information...
    • IEC# 120179 - 30" Vibrating Screen Mfg. Sweco with a 0.5 HP motor. Model# S30S66HS. Size: 1800 RPM, 575 Volts.
      For Information...
    • IEC# 120172 - 48" Vibrating Screen Mfg. Sweco with a 2.5 HP motor. Model# US48S88HS. Size: 1712 RPM, 575 Volts.
      For Information...
    • IEC# 121149 - Bird Johnnsn Model 24 stainless steel vibrating screen. Equipped with a 3/8" (0.188") hole diameter drilled stainless steel screenplate. Serial #JS 850.
      For Information...